Table of Contents
Advertisement
User Guide
3.3 System Fan Replacement
Attention:
ESD Mitigation Equipment (site specific)
• ESD Sensitive
• Electric Shock
• Fan Blade Danger
Extend the platform out of the rack to access the System Fan bay.
Step 1 :
a. From the front of the rack, using the T15 Torx screwdriver, loosen the two Torx captive screws
that secure the Chassis to the rail. Repeat this step to loosen the two Torx captive screws
that secure the Chassis to the remaining rail. The location of the captive screws are shown in
the following image.
Figure 26: Rack Ear Captive Screw Location
Hot swappable CRUs must be replaced one at a time.
Replacement Requirements
Personnel Required
Service Window
Tool
T15 Torx Screwdriver
3.3 System Fan Replacement
# Needed
1
1
3. Support
1
5 minutes
Required vs.
Recommended
Required
Required
41
Advertisement
Table of Contents
