Table of Contents
Advertisement
User Guide
Figure 32: Uninstall System Fan
Unpack and inspect the new System Fan for damage.
Step 3 :
a. Inspect the packaging that the System Fan replacement was shipped in and record any
damage to the box. Large cuts, open boxes, and crushed corners should be reported.
b. Remove the System Fan from the packaging and verify that there is no damage to the
System Fan. Dents, scratches, and broken parts should be reported. If major damage has
occurred to the System Fan, DO NOT use the replacement part.
Step 4 :
Install the System Fan into the enclosure.
a. Gain access to the System Fan bay by lifting the flexible Formex flap.
Figure 33: Flexible Label
3. Support
3.3 System Fan Replacement
44
Advertisement
Table of Contents
