Western Digital OpenFlex Data24 3200 User Manual page 114

User Guide
data24-usalp00000aa000a/",
data24-usalp00000aa000a/OperatingSystem/",
Determine the Adapters in the system using the Storage Device. Send a GET to the device ID
Step 3 :
gathered in the previous step.
curl -u username:password http://ip.of.target.iom:80/Storage/
Devices/openflex-data24-usalp00000aa000a/Adapters/ | jq
Review the output to locate the IP of the appropriate port. The port location in the following
Step 4 :
output is identified by
{
"Self": "http://10.20.30.40:80/Storage/Devices/openflex-data24-
usalp00000aa000a/Adapters/",
"Members": [
usalp00000aa000a/Adapters/1/",
usalp00000aa000a/Ports/?adapterid=1"
Determine the IP address of the adapter that is attached to your host using the ports link. This
Step 5 :
will be the IP that is used to perform an
Send a GET to the Ports object associated with the adapter.
"Self": "http://10.20.30.40:80/Storage/Devices/openflex-
"SystemType": {
"ID": 2,
"Name": "Storage"
},
"Name": "openflex-data24-usalp00000aa000a",
"ID": "openflex-data24-usalp00000aa000a",
"OperatingSystem": {
"Self": "http://10.20.30.40:80/Storage/Devices/openflex-
"Name": "Vendor Firmware",
"OSType": {
"ID": 59,
"Name": "IOM-A-AIC-A"
{
"Self": "http://10.20.30.40:80/Storage/Devices/openflex-data24-
"ID": "1",
"Name": "IOM-A-AIC-A",
"Status": {
"State": {
"ID": 16,
"Name": "In service"
},
"Health": [
{
"ID": 5,
"Name": "OK"
}
]
},
"HostName": "openflex-data24-usalp00000aa000a-iom-a-aic-a",
"Ports": "http://10.20.30.40:80/Storage/Devices/openflex-data24-
},
Truncated Example
.
Truncated Example
to find drives connected on the fabric.
nvme discover
4. Management
4.1 Open Composable API
106