Table of Contents
Advertisement
User Guide
Figure 121: Uninstall CMA Assembly
Repeat the previous step to remove the remaining CMA from the rack rails.
Step 5 :
Uninstall the cables from the CMA.
Step 6 :
a. Carefully remove the Management cable by pulling it from the rack mounting side of the
CMA.
Figure 122: CMA Cable Remove - Management
b. Repeat this step to remove the remaining cables leaving the power cable for last. It is highly
recommended that each cable is removed one at a time to for ease of uninstalling and to
avoid damage to the cables.
3.8 Cable Management Arm (CMA) Assembly Replacement
Note:
If needed, a #2 Philips screwdriver may be used to loosen the captive screws.
3. Support
96
Advertisement
Table of Contents
