Table of Contents
Advertisement
User Guide
Figure 125: CMA Cable Routing - QSFP
c. Route the Management cable through the channel in the CMA until about 18 in on the cable
is sticking out of the other end. The amount of cable slack can be adjusted once the CMA is
installed.
Figure 126: CMA Cable Routing - Management
Step 10 :
Repeat the previous step to install the cables into remaining CMA.
Step 11 :
Install the CMA.
a. Identify the mounting location of the CMA. The CMA is mounted into the two middle holes on
the system's rack mounted rails as shown in the following image.
3.8 Cable Management Arm (CMA) Assembly Replacement
3. Support
98
Advertisement
Table of Contents
