Table of Contents
Advertisement
User Guide
3.2 Drive Assembly Replacement
Attention:
replaced, there must be a waiting period of 30 seconds in between each drive insertion to avoid
the drive entering a degraded warning state. This would cause the drive to disconnect from the
host.
• ESD Sensitive
Step 1 :
Uninstall the Drive Assembly from the enclosure.
a. From the front of the rack, press the release button on the front of the Drive Assembly. The
release handle will eject outward.
Figure 21: Drive Assembly Release Operation
b. Use the release handle to pull the Drive Assembly out of the enclosure.
Hot swappable CRUs must be replaced one at a time. If multiple drives are being
Replacement Requirements
Personnel Required
Service Window
3.2 Drive Assembly Replacement
1
5 minutes
3. Support
38
Advertisement
Table of Contents
