Chassis Replacement - Western Digital OpenFlex Data24 3200 User Manual

User Guide
3.6 Chassis Replacement
ESD Mitigation Equipment (site specific)
• ESD Sensitive
• Electric Shock
• Team Lift Required
Step 1 : Disconnect the power and data cables from the enclosure.
a. Move to the rear of the rack and disconnect the power cables from each of the two Power
Supply Unit (PSU).
Figure 59: Disconnect Power Cables
b. Disconnect the Ethernet Cable from the RJ45 Ethernet Management port.
Figure 60: Disconnect RJ45 Ethernet Cables
Replacement Requirements
Personnel Required
Average Replacement Time
Tool
T15 Torx Screwdriver
Lift Equipment

3.6 Chassis Replacement

1 hour
# Needed Required vs. Optional
1
1
1
3. Support
2
Required
Optional
Required
60