Leds - Western Digital OpenFlex Data24 3200 User Manual

User Guide
1.2.1 LEDs
The OpenFlex Data24 3200 contains LEDs on the enclosure, PSU, system fans, drive slots, and the IOMs.
This section defines the LED name, corresponding color, and the behavior of each of the LEDs on the
system.
Enclosure LEDs
Figure 6: Enclosure LEDs (displaying three AIC configuration)
Table 2: Enclosure LED Flash Patterns
LED Name
Identification
Service
Fault
Power
LED Icon Color
White
Blue
Amber
Green
1.2 Design Details
Behavior
Blinks only when
Blink @ 1 Hz:
Identification has been activated.
Enclosure not being identified/
Off:
located
No LED behaviour (unused)
Enclosure has a fault
Solid:
Enclosure has no fault
Off:
Enclosure is booting
Blink @ 1Hz:
Enclosure is in low-
3Hz Quick Flash:
power mode.
Enclosure is powered on
Solid:
Enclosure is in a degraded or
Off:
warning state
1. Overview
6