Table of Contents
Advertisement
DOC-13025 Rev. A
Figure 6-42: Removing the old roller scraper blade
5. Remove the scraper blade and discard it.
6. Place the new scraper blade onto the pins in the holder, as shown.
Figure 6-43: Inserting the new roller scraper blade
7. Insert and tighten the roller scraper blade screws.
Important:
Tighten the screws in the order shown in figure 6-44.
Use the new screws supplied in the replacement kit.
Figure 6-44: Tightening the roller scraper screws
Connex500/350 User Guide
6–33
Advertisement
Table of Contents
