DOC-13025 Rev. A
printer will be loaded with cartridges containing two different
Model materials, the Printer Mode Selection screen appears.
Figure 6-11: Printer-mode selection
7. Choose whether you want to produce models in Single Material mode
or in Digital Material mode, and click
Single Material mode
Four print heads are used to print, using one Model material.
This mode is required to produce build trays with the High Quality
setting, and to produce trays with the High Speed setting, using only
one Model material.
Digital Material mode
Each of the Model materials loaded is used in two of the print heads.
If only one of the Model materials is required for printing, models
are produced using two print heads. This makes it unnecessary to
replace the other Model material.
If Model‐material substitution is allowed, the printer produces trays
with the High Speed setting using a mixture of Model materials (see
"Model Material Substitution" on page 5‐51).
Continue with step 8 on page 14.
Connex500/350 User Guide
.
Next
6–13