Table of Contents
Advertisement
DOC-13025 Rev. A
21. When the following wizard screen appears, remove all tools and
objects from the printer and confirm that you have done so.
Figure 6-68: Cleared-tray confirmation screen
When you click
Next
material.
If installation problems are detected, the wizard alerts you and instructs
you how to continue (see "Installation Problems.")
Before using the printer to produce models, you should calibrate the heads
and check their alignment.
Figure 6-69: Final wizard screen after replacing print heads
Connex500/350 User Guide
, the print block is heated and filled with printing
6–47
Advertisement
Table of Contents
