Stratasys Connex500 User Manual page 110

Using Objet Studio
5–74
6. In the pop‐up message, confirm that you want to work in off‐line mode
by clicking .
No
Figure 5-108: Off-line message
When Objet Studio is in off‐line mode, you can configure it for preparing
print jobs for different printers.
To change the Objet Studio off-line configuration:
1. In the Set Printer dialog box, select a printer type.
Figure 5-109: Off-line printer selection
2. Click OK (not "Connect").
DOC-13025 Rev. A