Stratasys Connex500 User Manual page 161

DOC-13025 Rev. A
9. Press down on the upper and lower locking screws to release the print
head.
Figure 6-58: Releasing the print head
10. Loosen the screws on the door of the compartment protecting the
print‐head driver cards (A), then pull and lift up the door (B).
Figure 6-59: Opening the print-head compartment
11. Pull the print‐head driver card out of its socket so that the head is free
(A), and remove it from the bottom of the print block (B).
Figure 6-60: Releasing the print-head driver card to remove the head
Connex500/350 User Guide
6–43