Stratasys Connex500 User Manual page 33

DOC-13025 Rev. A
If you click , the following screen should appear.
Yes
Figure 4-2: Objet Studio installation wizard—Welcome screen
6. Click to begin installation.
Next
7. In the Select Features screen, select the required installation option.
Select
Objet Studio for a server computer
•
if you are installing Objet Studio on the server ("host") computer—
the computer directly connected to an Connex printer.
•
if you are installing Objet Studio on a standalone (off‐line)
computer.
Select
Objet Studio for client workstations
Studio on a "client" workstation—a remote computer that prepares
print jobs and then sends them to a server computer.
Figure 4-3: Objet Studio configuration selection
Connex500/350 User Guide
...
if you are installing Objet
4–3