Stratasys Connex500 User Manual page 103

DOC-13025 Rev. A
To perform a test of the driver configuration and enter the suggested
pixel format ID:
1. Select
Choose Format
2. Click .
Test
Objet Studio returns the recommended pixel format ID.
Figure 5-97: Recommended pixel format ID
3. Click .
OK
4. In the OpenGL Driver Configuration dialog box (figure 5‐96), select
and enter this number.
Format ID
5. Click .
Apply
6. Display the other pixel format tab, and repeat this procedure.
Connex500/350 User Guide
.
Pixel
5–67