Using Objet Studio
Object display
options
Zoom Options
5–46
The display format affects how quickly objects display. For example, if you
select
, objects display faster than they do when you select
Bounding Box
. You can choose display formats for objects when they are
Entire Object
stationary (static view) and for when you are dragging them (changing view).
To select the object display preference while changing view, and in static
view:
1. Select to display objects:
•
With a Bounding Box (see figure 5‐52 on page 40)
•
With Adaptive Polygon Reduction (changing view only)
•
With Polygon Reduction (static view only)
•
Entire Object
2. Click
when done.
OK
While manipulating objects, you often need to view them at different zoom
levels.
To change the zoom level:
On the ribbon, open the Zoom flyout toolbar and select an option:
Figure 5-66: Zoom flyout toolbar
Zoom Object focuses on the selected object.
Zoom Tray displays the whole tray.
Zoom by Rectangle allows you to display a section of the tray by
selecting it with the mouse.
You can also zoom in and zoom out with the mouse wheel.
You can configure Objet Studio to automatically zoom in on the objects
placed on the build tray. See "Automatic Zoom" on page 65.
Zoom Object
Zoom Tray
Zoom by Rectangle
DOC-13025 Rev. A