Hiding The Ribbon - Stratasys Connex500 User Manual

Using Objet Studio
Hiding the
Ribbon
5–60
3. To choose from a wider range of commands:
•
From the Customize Quick Access Toolbar menu (see figure 5‐82 on
page 59), select
or—
•
Right‐click on the Objet Studio Commands icon
on the ribbon, and select
Figure 5-84: Right-click ribbon menu
The Options dialog box opens.
Figure 5-85: Quick Access Toobar Options dialog box
4. Open the drop‐down list and select either
Commands not on the Ribbon
5. Select a command and click
6. Click .
OK
To make more room for displaying the build tray, you can hide the Objet
Studio ribbons.
To hide the ribbons:
1. Right‐click anywhere on the ribbon or on the menu bar, or in the Objet
Studio Commands menu
2. Select
Minimize the Ribbon
The ribbons disappear, but you can temporarily display the ribbon
icons by clicking Tray Settings
you next click outside of the ribbon, it disappears again.
To return the permanent ribbon display:
Repeat the steps above to cancel Minimize the Ribbon.
.
More Commands
Customize Quick Access Toolbar
.
.
Add
.
.
or Job Manager
, or elsewhere
.
or
Popular Commands
on the menu bar. When
DOC-13025 Rev. A