Assigning Properties To Hidden Objects - Stratasys Connex500 User Manual

Assigning
Properties to
Hidden
Objects
DOC-13025 Rev. A
To inspect, modify or remove the coating applied to an object:
1. On the Model Toolbar or the Model Settings ribbon, click
The Coat with dialog box opens.
2. Perform one of the following actions—
•
Change the coating settings, and click
•
To remove the coating, clear the Coat With check box and click
•
To keep the current coating settings, click
To enable you to assign materials and other properties to parts of objects
that are hidden from view on the build tray display, you can temporarily
turn off the display of some objects.
To prevent the display of objects:
1. Right‐click an object, either on the build tray or in the model tree.
2. From the menu that opens, select one of the following options—
•
, to cause the selected object to disappear.
Hide
•
, to cause all other objects on the build tray to disappear,
Hide Others
so that only the selected object is displayed.
Alternately, you can clear the check box next to the name of the
object in the model tree to cause that object to disappear.
Figure 5-31: All objects displayed
Connex500/350 User Guide
.
Apply
or
Apply Cancel
Figure 5-32: Outer object hidden
.
.
Apply
.
5–25