Stratasys Connex500 User Manual page 141

DOC-13025 Rev. A
3. Follow the instructions on the wizard screens, and select the
confirmation check boxes.
Figure 6-23: Head cleaning procedure—wizard screen
4. Click .
Next
The printer prepares for you to clean the print heads.
5. When the following screen appears, open the cover.
Figure 6-24: Head cleaning wizard—steps 5–11
WARNING: The print head orifice plates (bottom surface) might be hot,
so proceed with caution.
6. Place the mirror on the build tray.
7. Put on the gloves.
CAUTION: Uncured printing material on the print heads might cause
skin irritation. Use disposable cleaning gloves to protect your hands.
8. Soak the cleaning cloth with alcohol.
Connex500/350 User Guide
6–23