Changing An Object's Orientation - Stratasys Connex500 User Manual

Changing an
Object's
Orientation
DOC-13025 Rev. A
There are several methods for changing the orientation of objects on the
build tray.
To rotate an object:
Select the object and use the Object menu options (see also
"Repositioning Objects" on page 33).
To re-align an object's plane:
1. On the Tray Settings or Model Settings ribbon—
a. Click the icon in the Selection group:
b. On the flyout toolbar, click the Select Plane icon:
or—
From the Tools menu, select
2. Click on part of an object on the build tray.
The selected plane is displayed.
Figure 5-46: Aligning by plane
3. On the Alignment toolbar, click an appropriate icon to change the
alignment.
or—
From the Tools menu, select
option.
Connex500/350 User Guide
or
Plane Alignment > Select Plane
, and select an alignment
Plane Alignment
.
.
Alignment
toolbar
Selected
plane
5–35