Launching Objet Studio; Windows® 7 Security Warning - Stratasys Connex500 User Manual

Launching Objet Studio

®
Windows 7
Security
Warning
DOC-13025 Rev. A
After you install Objet Studio, a launch icon
Windows desktop. Open the application by double‐clicking this icon, or by
selecting Objet Studio from the
Depending on the User Account Control settings in Windows
might see the following warning when opening Objet Studio.
Figure 5-1: Security Warning
If you click , Objet Studio opens. However, this warning message will
Yes
appear each time you open the program, unless you change the User
Account Control settings.
To prevent the warning message from appearing again:
1. Click the link at the bottom of the security warning dialog box (
when these notifications appear
2. In the User Account Control Settings screen, move the slider to "Never
notify."
Figure 5-2: Changing the User Account Control settings
3. Click .
OK
Connex500/350 User Guide
appears on the
Start menu.
).
®
7, you
Change
5–3