Table of Contents
Advertisement
DOC-13025 Rev. A
To use polygon reduction:
1. From the Tools menu, select
or—
From the Objet Studio Commands menu
2. In the Options dialog box, display the
Figure 5-65: Options dialog box, Display tab
3. Select
Enable Polygon Reduction
4. Select
Polygon Reduction (Percent)
5. Enter the percentage of total polygons to display.
When you click
Apply
Note: The setting affects the static display (when the object is not being
moved).
6. Set display options when the object is being moved (Display while
changing view):
•
Bounding Box—A box representing the object's maximum
dimensions is displayed.
•
Adaptive Polygon Reduction—Varying degrees of polygon reduction
are applied, as necessary.
•
Entire Object—No polygon reduction is applied.
7. To save these settings, so that they will be applied every time you place
this object on the build tray, click
8. Click
to see the results of the settings without closing the dialog
Apply
box.
Selecting the Entire Object option cancels polygon reduction.
Connex500/350 User Guide
.
Options
Display
.
.
, the display changes.
Save Polygon Reduction Data
, click
.
Options
tab.
.
5–45
Advertisement
Table of Contents
