4
VMP Operations
Users can only perform some basic operations on the LCD screen of MX6000 Pro. To perform more operations,
please install Vision Management Platform (VMP) on the control PC.
4.1 Connect to VMP
Via Ethernet Cable
Connect the controller and the control PC directly using an Ethernet cable, and assign a static IP address to the
controller to ensure that the controller and control PC are on the same network segment.
Via LAN
Connect the controller and the control PC to the same LAN and set the controller to automatically obtain an IP
address.
4.2 UI Introduction
Figure 4-1 UI Introduction
Note:
All the figures in this document use operations in Windows10 as examples.
You can refer to section
display content due to misoperation.
www.novastar.tech
4.6.3 Lock and Unlock Correction Page
MX6000 LED Display Controller User Manual
to lock the Correction page to avoid changing the
10