Menu Operations; Step 1: Input Settings - NovaStar VX4S-N User Manual

Second row: Main layer 1; signal source; input source signal format;
Third row: PIP 2; signal source; input source signal format;
Forth row: Status bar. the meanings of all icons are shown below.

6 Menu Operations

The functions of the VX4S-N are powerful with very simple operation, and multiple
operations can be completed with a knob and a return key. The design of more than one
shortcut keys makes operations more efficient.
Generally, the LED display can be used normally, and the brightness is moderate after
conducting the following four steps: Input settings → Screen settings → Brightness →
Output settings. Other menus such as screen control and senior setting can help users
better control LED display.
See the following section for details of operations.

Step 1: Input Settings

Set resolution of input source signal. Resolution can be directly set and changed for digital
input interfaces DVI, HDMI and DP. Resolution can only be modified with other input
methods on input devices.
Input resolution can be set in two methods:
Method I: Preset Resolution.
V X 4S - N U s e r M a nu a l
LED Output (it is output Port 2 in primary mode currently, and the
backup status is displayed as.)
PIP is turned off
PIP is turned on
The current effect is point-to-point display
It is "scale down" mode
It is "scale up" mode
Image Mosaic is not enabled;
Image Mosaic is enabled;
It is USB control currently
It is network port control currently
The current brightness is 25%
Sign of press key lock. When this icon appears at the main
interface, it is in locking state for key and knob functions.
-5-