Correct Multi-Batch Cabinets/Modules - NovaStar MX6000 Pro User Manual

When correcting the module seams, if you need to override the numbers of module columns and rows, set the
Cabinet Structure Override switch to
Figure 4-26 Cabinet structure override
In the topology area, click or click and drag the mouse to select the seams to be corrected.
Set the adjustment parameters.
Figure 4-27 Set the parameters.

Quick adjust: Has a large range of adjustment.

Fine adjust: Has a small range of adjustment.

Hide cursor on screen: When this is set to
will not be displayed on the screen.
Place the mouse on the scroll wheel icon and adjust the brightness by dragging the wheel icon up or down, scrolling
the mouse wheel, or using the keyboard shortcuts 4+↑/↓.

Restore: Restore the configuration to the last saved.

Reset: Reset the configuration to the status before adjustment.
After the settings, click Save.

4.6.2 Correct Multi-Batch Cabinets/Modules

Adjust the chroma of cabinets or modules from multiple batches to make the overall chroma of the display more
balanced and uniform. If brightness correction has been done for the screen, the screen brightness can be adjusted
in nits. Otherwise, it can be adjusted only in percentage.
Select the controller from the device list and then select Correction.
Select the Modules tab in the properties pane.
Set the display content.
www.novastar.tech
. Otherwise, skip this step.
, use the keyboard shortcuts to adjust the seams and the cursor
MX6000 LED Display Controller User Manual
26