User Manual About this Document The MBOX600 is an LED display controller from NovaStar that integrates an industrial PC and sending capability. It is applicable to the scenarios where no PC is used for controlling LED displays, for example, outdoor fixed displays.
MBOX600 Industrial Controller User Manual Hardware Connection Front Panel Rear Panel Note: The COM1 is a reserved interface that is not used. www.novastar.tech...
MBOX600 Industrial Controller User Manual Software Installation Preinstalled with Linux For the MBOX600 preinstalled with Linux, if necessary, install Windows and required applications according to the description in this section. 3.1.1 Installing Windows Please buy Windows from official channels and install it.
Page 6
MBOX600 Industrial Controller User Manual Configuration Options The configuration options to be checked are shown in Table 3-2. If a configuration option does not conform to the target status, please change it. Table 3-2 Configuration options Configuration Options Target Status...
Page 7
MBOX600 Industrial Controller User Manual Step 3 Click Open Windows Defender Security Center. Step 4 Check whether the firewall is turned off. Checking Screen Off and Sleep Step 1 Choose System. Step 2 Choose Power & sleep. Step 3 Check whether all the four configuration options are set to Never.
Step 3 Choose Region & language and choose a language to set it as the system language. Preinstalled with Windows For MBOX600 preinstalled with Windows 10 IOT Enterprise, please activate Windows and install required applications according to the description in this section.
User Manual 3.2.1 Activating Windows View the registration code on the enclosure and activate Windows. 3.2.2 Installing Applications MBOX600 is preinstalled with Windows and the applications shown in Table 3-3. NovaStudio is not preinstalled. If necessary, users can visit www.novastar.tech to get and install NovaStudio.
MBOX600 Industrial Controller User Manual Screen Configuration NovaLCT is used to configure receiving card parameters. You can configure parameters manually or by loading configuration files. For more information, see NovaLCT LED Configuration Tool for Synchronous Control System User Manual attached to the software.
MBOX600 Industrial Controller User Manual Program Playback When the MBOX600 is installed with VPlayer and NovaStudio, the following three playback solutions will be supported. Remote publishing Publish programs to VPlayer with VNNOX Standard or VNNOX AD remotely. VPlayer downloads and plays the programs.
MBOX600 Industrial Controller User Manual FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.