Set Shutter Fit; Enable 3D Function - NovaStar MX6000 Pro User Manual


Video: The first and second frames display the input source image. The first frame displays the image from the
coordinates (0, 0) and the second frame displays the image from the coordinates (1920, 0).

Color: The third frame displays a pure white image.

4.8.2.4 Set Shutter Fit

Adapt the screen and camera shutter to produce better filming results.
Prerequisites
It requires that the sync signal must be Genlock and the controller and camera need to use the same Genlock signal
generator.
Operating Procedure
Select the controller from the device list and then select Screen Settings.
In the Output tab, set Shutter Fit to
Figure 4-48 Shutter Fit
Set the relevant parameters.

4.8.2.5 Enable 3D Function

Enable the 3D function and set the related parameters for users wearing 3D glasses to view stereoscopic images.
Notice

The 3D function and the low latency or frame multiplication function cannot be enabled at the same time.

Only the main layer supports 3D effect.
Related Information
To use the 3D function, specified 3D glasses are needed. Please contact NovaStar technical support.
Operating Procedure
Select the controller from the device list and then select Screen Settings.
In the Output tab, set 3D to
Figure 4-49 3D
Set the relevant parameters.
www.novastar.tech
.
.
MX6000 LED Display Controller User Manual
35