Adjust Eotf; Set Output; Set Output Bit Depth And Additional Frame Latency - NovaStar MX6000 Pro User Manual

Prerequisites
Before the operation, thermal calibration must be done and thermal coefficients must be uploaded.
Operating Procedure
Select the controller from the device list and then select Screen Settings.
In the Image Quality tab, set the Thermal Compensation switch to
Figure 4-43 Thermal compensation
Drag the slider to adjust the application intensity of the thermal coefficients.

4.8.1.5 Adjust EOTF

Note
The supported adjustment parameters depend on the HDR settings.
Select the controller from the device list and then select Screen Settings.
In the Image Quality tab, drag the sliders to adjust the values of Shadow Compensation, Ambient Light
Compensation and Clip Level.
Figure 4-44 EOTF Adjustment

4.8.2 Set Output

4.8.2.1 Set Output Bit Depth and Additional Frame Latency

Note
When the controller works with high-latency devices, you can set additional frame latency.
Select the controller from the device list and then select Screen Settings.
In the Output tab, select an option from the drop-down list of Bit Depth.
If Auto is selected, the output bit depth is the same as the input bit depth.
Figure 4-45 Output bit depth
www.novastar.tech
MX6000 LED Display Controller User Manual
.
33