Table of Contents
Advertisement
Internal sources
a.
Choose Internal Source > Internal Source, and select a picture.
b.
Set the parameters according to your actual needs; otherwise, please skip this step.
c.
After the settings are done, tap Apply.
The Apply action takes effect only for resolution and frame rate. The adjustments of other parameters take
effect immediately.
5.2 Free Screen Configuration in VMP
The CX4 Pro does not support screen configuration on LCD. After input settings are completed, please configure the
cabinet topology in VMP software to complete the logical connection of cabinets.
The VMP software can be used to configure either the regular screens or complex screens, and supports free wiring
of the cabinets, plus the ability of calculating the used load capacity according to the cabinets that are actually
loaded.
Complete the hardware connection.
VMP supports automatic readback of the number of cabinets connected to each Ethernet port and the load capacity
of each Ethernet Port. Before configuring the screen, make sure that the cabinets have been connected to the output
Ethernet ports.
Run VMP and complete network settings in the CX40 Pro.
On the home page, select Layout.
Figure 5-2 Layout
www.novastar.tech
CX40 Pro LED Display Controller User Manual
11
Advertisement
Table of Contents
