Display Correction; Correct Seams - NovaStar MX6000 Pro User Manual

Set the Resolution, Refresh Rate, and Bit Depth
Select a value from the drop-down lists of Resolution, Refresh Rate, and Bit Depth and then click Apply.
Figure 4-23 Internal source parameters

4.6 Display Correction

4.6.1 Correct Seams

Adjust brightness of the seams between cabinets or modules to improve the visual experience. If brightness
correction has been done for the screen, the screen brightness can be adjusted in nits. Otherwise, it can be adjusted
only in percentage.
Select the controller from the device list and then select Correction.
On the Seams tab page in the properties area, set the Seam Correction switch to
Set the parameters in the Display area.
Figure 4-24 Display content (seams)

Calibration: Set the Calibration switch to
calibration platform.

Brightness: Adjust the display brightness.

Image: Set which image the screen displays. To display the image of current input source, click
Select a correction mode.
Figure 4-25 Select mode (seams)

Cabinet Seams: Correct the seams of cabinets.

LDM Seams: Correct the seams of the modules.
www.novastar.tech
MX6000 LED Display Controller User Manual
to make the screen apply the calibration effect made by the
.
and hold it.
25