Set External Sources - NovaStar MX6000 Pro User Manual

−
Right-click a layer and select Bring to Front, Send to Back, Bring Forward or Send Backward from the
displayed menu.
−
At the top right of a layer, click a function icon to set the layer.
: Lock the layer.
: Unlock the layer.
: The layer size is the same as the input source resolution.
: The layer automatically fill the screen.
: The layer size changes automatically according to the canvas size.
: Delete the layer.
Set borders
Select a layer and enable or disable the layer borders function in the properties area. After enabling the function,
you can set the border thickness and color.
Crop the input source
Select a layer and enable or disable the Crop function in the properties area. Then, you can set the crop size
and position on the thumbnail of the layer. You can also make adjustments by setting the parameter values
below the thumbnail. When Same as Layer Size is set to
according to the layer size.

4.5.2 Set External Sources

Select the controller from the device list and then select Source. Select an external source from the source list and
do the following as required.
Set DP 1.4 Mode
Select an option from the drop-down list to calculate the layer resources for the DP 1.4 connector.

8192*2160@60Hz: Up to 2 layers can be added.

4096*2160@60Hz: Up to 4 layers can be added.
www.novastar.tech
MX6000 LED Display Controller User Manual
, the input source image will be cropped
21