Table of Contents
Advertisement
Figure 4-11 Ethernet port capacity
8/-: Indicates that 8 cabinets are connected to the Ethernet port.
45%: Indicates these 8 cabinets have used 45% of the Ethernet port's capacity.
Figure 4-12 Cabinet Information
Note
If all the cabinets loaded by the Ethernet ports have the same size, you can use the swift layout function to quickly
add and connect the cabinets for all the Ethernet ports.
The operations are as follows:
Click Swift Layout and then drag the mouse on the canvas to add cabinets that match the actual requirements. In
the properties area, select a layout and click Done.
Select another Ethernet port and continue to add cabinets until all cabinets are connected.
To change the cabinet model, simply select the cabinet and then click Change in the property area.
For cabinets that have the same size and consecutive serial numbers, if you want to change the cabinet connection
topology, select the cabinets and then select a quick topology under Quick topo in the properties area, as shown in
Figure
4-13. For other cabinets, skip this step.
Figure 4-13 Quick topology
www.novastar.tech
MX6000 LED Display Controller User Manual
16
Advertisement
Table of Contents
