NovaStar MX6000 Pro User Manual page 31

Figure 4-28 Display content (multiple-batch)

Calibration: Set the Calibration switch to
calibration platform.

Brightness: Adjust the display brightness.

Image: Set which image the screen displays. To display the image of current input source, click
Select a correction mode.
Figure 4-29 Select mode (multiple-batch)

Cabinet: Correct the multi-batch cabinets.

Module: Correct the multi-batch modules.
When correcting the multi-batch modules, if you need to overwrite the numbers of module columns and rows, set the
Cabinet Structure Override switch to
Figure 4-30 Cabinet structure override
In the topology area, click or click and drag the mouse to select the cabinets or modules to be corrected.
Drag the slider to adjust chroma.
Figure 4-31 Adjustment

Restore: Restore the configuration to the last saved.
www.novastar.tech
to make the screen apply the calibration effect made by the
. Otherwise, skip this step.
MX6000 LED Display Controller User Manual
and hold it.
27