In the device list on the left, select the desired controller.
From the menu bar, choose Tools > Coefficient Management.
In the Select Mode area, select the saving range as needed, including Screen, Cabinet, LDM and Pixel.
Figure 4-64 Select mode
In the Coefficient Management area, click Save.
Figure 4-65 Save calibration coefficients
In the pop-up dialog box, set the relevant parameters and click OK to save the current coefficients to the receiving
cards.
4.11.5 Read Back Calibration Coefficients
Read back the calibration coefficients saved in the receiving card and apply them to the current screen.
Notice
During coefficient readback, if the receiving cards go offline, the readback will fail.
Operating Procedure
In the device list on the left, select the desired controller.
From the menu bar, choose Tools > Coefficient Management.
In the Select Mode area, select the reading range as needed, including Screen, Cabinet, LDM and Pixel.
Figure 4-66 Selecting working mode
In the Coefficient Management area, click Read.
www.novastar.tech
MX6000 LED Display Controller User Manual
45