Table of Contents
Advertisement
The target cabinets must have cabinet IDs.
Notice
During coefficient uploading, if the controller and/or receiving cards go offline, the uploading will fail.
If the coefficient uploading fails, the coefficients will not be saved automatically. You can manually save them as
needed.
Operating Procedure
In the device list on the left, select the desired controller.
From the menu bar, choose Tools > Coefficient Management.
Figure 4-56 Calibration coefficient management
In the Select Mode area, select the uploading range. The options include Screen, Cabinet and LDM.
Figure 4-57 Select mode
In the Coefficient Management area, click
computer.
The coefficient types in the file will be read automatically. You can select the range of coefficient types as needed.
www.novastar.tech
MX6000 LED Display Controller User Manual
and select the target calibration data file (.db) from the local
41
Advertisement
Table of Contents
