Check Monitoring Records - NovaStar MX6000 Pro User Manual

Figure 4-54 Screen monitoring

: The controller.
−
Check the status of the connectors on the rear panel of the controller.
−
Check the controller's name, current uptime, total uptime, mainboard temperature, mainboard voltage, and
fan status.
−
Check the temperature and voltage of the cards.
−
Set on/off of the Controller Finder switch. When set to
−
Set on/off of the Total Errors switch. When set to
−
Set on/off of the Fan switch. When set to
Controller area.

: The receiving card temperature. In the properties area, you can check the temperature information.

: The cabinet voltage. In the properties area, you can check the voltage information.

: The total bit errors. In the properties area, you can check the detailed information of the errors. Click
to clear the errors and click
Note
Selecting ,
under the Cabinet section of the properties area. You can also blackout, freeze, or enable test patterns for cabinets
under the Cabinet Settings section.

4.10.2 Check Monitoring Records

Select the controller from the device list and then select Preset. At the bottom of the page, do the operation as
needed.
www.novastar.tech
to check the error information in a specified time range.
, or enables you to check the cabinet position, voltage, total uptime, and current uptime
MX6000 LED Display Controller User Manual
, you can locate the controller.
, you can monitor the errors.
, you can monitor the fan status and display it in the
39