Table of Contents
Advertisement
Figure 4-72 Cabinet maintenance
Select the target cabinets and perform any of the following operations：
Check the cabinet information
Check the cabinet status, manufacturer, model, firmware version, location, etc.
Copy the firmware program and configuration file
Click Cabinet Painter and select one or more cabinets so that other cabinets can have the same firmware
program and configuration file as the selected cabinet.
Restart the cabinet
Click Restart and click OK.
Upload the NCP file, firmware program, configuration file, image quality file and update cabinet
a.
On the Cabinet tab page, select one or multiple cabinets, click Update, and select an update method.
b.
Click Import and upload the file.
To upload NCP file, select NCP File.
To upload firmware program, select Firmware.
To upload configuration file, select Config File.
www.novastar.tech
MX6000 LED Display Controller User Manual
50
Advertisement
Table of Contents
