Table of Contents
Advertisement
Do any of the following to arrange and align the cabinets to let the cabinet positions meet the display requirements.
Use the function buttons
−
1:1: The canvas size equals to the input source resolution.
−
Zoom to Selection: The selected element is zoomed and displayed in the center of the canvas.
−
Fit Screen: The canvas size is automatically adjusted to fit the topology area size.
Click
to show its drop-down menu shown below. The menu can be used to set the canvas grid.
−
Grid: When toggled on (
switch to
−
Color: Set the grid color.
−
Spacing: Set the spacing of horizontal and vertical lines of the grid. The spacing is set to the resolution of the
first cabinet by default.
−
Snap to Cabinet: When positioning a cabinet near another one, the cabinet being moved will automatically
align and snap to the edge of the adjacent cabinet, effectively eliminating gaps.
−
Snap to Grid: The cabinet will be snapped to the grid.
Use the function menus on the menu bar
−
Edit menu
−
View menu
www.novastar.tech
), a grid is displayed on the canvas. If you do not need to display the grid, set the
.
MX6000 LED Display Controller User Manual
17
Advertisement
Table of Contents
