Device Management; Export And Import Project Files - NovaStar MX6000 Pro User Manual

4.3 Device Management

4.3.1 Export and Import Project Files

Export the project files (.nprj) of devices or device groups so that you can import the files to apply the configuration
data to the same kind of devices, improving the configuration efficiency.
Notice
The project file can be imported only to the device that is of the same model as the file device, and the first two digits
of the firmware version of the target device must be the same as those of the firmware version of the file device.
For example, the project file of V1.2.0 can be imported to the devices whose firmware version is V1.2.1, but the
project file of V1.1.x cannot be imported to devices whose firmware version is V1.2.x.
Export Project Files
From the menu bar, choose Project > Export and select a device or device group.
You can also right-click a device or device group in the device list and select Export from the pop-up menu.
Select a local directory and click Save.
Figure 4-2 Successful export
Import Project Files
From the menu bar, choose Project > Import to and select a device or device group.
You can also right-click a device or device group in the device list and select Import from the pop-up menu.
Select a local project file and click Open.
After successful device matching, a dialog box as shown in
Figure 4-3 Matching devices
Click OK.
www.novastar.tech
MX6000 LED Display Controller User Manual
Figure 4-3 is displayed.
11