Figure 5-10 Network
Toggle on or off Obtain Automatically.
: The device automatically obtain an IP address.
: You need to manually set an IP address for the device.
If Obtain Automatically is disabled, you need to set an IP Address, Subnet Mask and Default Gateway and. If it is
enabled, this step is not required.
After the settings are done, click Apply.
5.5 Settings
5.5.1 Configure LCD Screen
Select Settings from the main menu to access the settings interface.
Figure 5-11 Configure LCD screen
Select Auto Lock LCD and set a value in the pop-up dialog box.
Select LCD Brightness and adjust the value.
5.5.2 Setting Language
Select Settings from the main menu to access the settings interface.
www.novastar.tech
MX6000 LED Display Controller User Manual
62