Set The Cabinet - NovaStar MX6000 Pro User Manual

Figure 4-14 Backup settings
Click Verify Primary or Verify Backup to examine whether the channel is working properly.

Verify Primary: Disconnect the backup channel and examine whether the primary channel is working properly.

Verify Backup: Disconnect the primary channel and examine whether the backup channel is working properly.

4.4.4 Set the Cabinet

Select the controller from the device list and then select Layout. Select one or more cabinets and do any of the
following operations in the properties area.
Figure 4-15 Cabinet settings
Control Display Status
Set the Blackout or Freeze switch to
Enable Indicator
Set the Indicator switch to
Enable the Light Up Slowly Function
Set the Light up slowly switch to
change from 0 to the target value.
Set Test Pattern
Select a test pattern from the drop-down list of Test Pattern to perform screen aging test and troubleshoot problems.
Set Image for Abnormal Situations
Select an option from the No Data signal drop-down list.

Blackout: The screen displays a black image.

Last Frame: The screen always displays the last frame.
www.novastar.tech
.
to enable the running status indicator of the cabinet.
so that after the screen is powered on, the display brightness will slowly
MX6000 LED Display Controller User Manual
19