Check The Load; Preset Management; Save Presets - NovaStar MX6000 Pro User Manual


Source Format: Set the format of the 3D video source. Set the format to Side-by-side, Top-and-bottom or
Frame sequential according to the format of the accessed video source.

Right Eye Offset: Set the start position of the right eye image. When the video source format is side-by-side or
top-and-bottom and the left and right eye images are provided, this parameter can be set.

Eye Priority: Set which image is sent first, the right eye image or the left eye image. Wear the 3D glasses to
watch the display. If the display is abnormal, set the parameter value to the other one. If the display is normal,
the setting is done.

3rd Emitter: When a third-party 3D signal emitter is used, set the switch to

Emitter Delay: Set the delay time of sending the synchronization signal from the 3D signal emitter to the 3D
glasses. This setting ensures that the switching between left and right eye images of the 3D glasses is in sync
with the switching between the left and right eye images on the display. This parameter is applicable to both the
NovaStar and third-party emitters.

4.8.2.6 Check the Load

Select the controller from the device list and then select Screen Settings.
In the Output tab, click
Figure 4-50 Port load

4.9 Preset Management

4.9.1 Save Presets

After completing the display effect adjustment, you can save the data of the Source, Layout, Processing and
Screen Settings pages as presets so that these data can be directly applied in the future. Up to 128 presets can be
saved in VMP.
Notice
The preset of a specific device can only be applied by this device itself and the preset of a group can be applied by all
the devices in the group.
Operating Procedure
Select the controller from the device list and then select Preset.
On the preset management page, click
To go back to the preset management page, click a blank area in the properties area.
www.novastar.tech
next to the device information to check the usage of the controller's load capacity.
to enter the page shown in
MX6000 LED Display Controller User Manual
.
Figure 4-51.
36