Menu Operations; Screen Brightness; Screen Configuration - NovaStar VX1000 User Manual

5

Menu Operations

Operating Instructions

Knob:
−
On the home screen, press the knob to enter the operation menu screen.
−
On the operation menu screen, rotate the knob to select a menu item and press the knob to confirm the
selection or enter the submenu.
−
When a menu item with parameters is selected, you can rotate the knob to adjust the parameters.
Please note that after the adjustment, you need to press the knob again to confirm the adjustment.

ESC: Exit the current menu or cancel an operation.

Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock the front panel
buttons.
After the settings, if you need to shut down the device, please wait at least 5 seconds; otherwise, the
parameter settings may not be saved.

Screen Brightness

Screen brightness allows you to adjust the LED screen brightness in an eye-friendly way according to the
current ambient illuminance. Besides, appropriate adjustment of screen brightness can extend the service life
of the LED screen.
Figure 5-1 Screen brightness
Step 1 On the home screen, press the knob to enter the main menu screen.
Step 2 Select Screen Brightness and press the knob to confirm the selection.
Step 3 Rotate the knob to adjust the brightness value. You can see the adjustment result on the LED screen in real
time. Press the knob to apply the brightness you set when you are satisfied with it.

Screen Configuration

Screen configuration allows you to perform the following operations, including configuring the screen, sending
the cabinet configuration file, saving configuration to the receiving card, changing LED screen color, setting
output frame rate and output mapping.
On the home screen, press the knob to enter the main menu screen. Rotate the knob to select Screen
Configuration and press the knob to enter the screen configuration screen.
www.novastar.tech
VX1000 All-in-One Controller User Manual
10