Table of Contents
Advertisement
Figure 4-55 Monitoring records
Search records
Enter the key words in the search box.
Query records
Click the time widget and set the start and end time. If you select Now, the monitoring records will be updated in
real time.
Set how the records are displayed
From the drop-down list, select Sort by time, Order by controller, Order by type, and Order by level. If the
latter three are selected, the records can be expanded or collapsed.
Clear records
Click Delete and then click OK.
Export records
Click Export, select a file page, set a file name, and click Save.
4.11 Calibration Coefficient Management
Upload, save, adjust, and read back calibration coefficients.
4.11.1 Upload Calibration Coefficients
Upload the local calibration coefficient file to the current screen, cabinet or module and apply the coefficients to the
display effect.
Prerequisites
To upload screen coefficients, make sure:
−
The screen configuration is done, the cabinets are not rotated, and there are no cabinet gaps or overlapping.
−
The configured screen must be rectangular, and the cabinet on the top left corner (as shown in the figure
below) must be at the (0, 0) point of the canvas.
−
To use the database file, you should prepare it in advance, and the resolutions of the configured screen and
the screen in the database must be the same.
To upload cabinet coefficients, make sure:
www.novastar.tech
MX6000 LED Display Controller User Manual
40
Advertisement
Table of Contents
