NovaStar MX6000 Pro User Manual page 60

Area Content
192.168.102.189
Input / IN 1 to 8
Output
OUT 1 to 8
MVR (Reserved)
Control CTRL
Power PWR
Supply
Bottom
line
Right Genlock
side
Screens
www.novastar.tech
MX6000 LED Display Controller User Manual
Description
The connection status of the USB drive

Green: Connected

When the icon is not displayed: Disconnected
The device IP address
The device input source type and status.

Green: The input source is connected.

Red: The input source is being used for the screen but not
connected.

Gray: The input source is not connected.
The status of the output Ethernet ports.

Green: The Ethernet port is connected and working normally.

Red: The Ethernet port is connected but working abnormally.

Gray: Disconnected
When the Ethernet port, associated card, or associated device is used
as a backup, you will see an orange triangular icon displayed in the
top-right corner.
The status of the MVR card ports.
The status of the control Ethernet port, AUX port, and GENLOCK port.

Green: Connected

Gray: Disconnected
The status of the device power supply.

Green: Connected

Gray: Disconnected
The chassis fan speed.

Green: The fan speed is normal.

Yellow: Fan speed alarm. The speed has exceeded the
threshold range.

Yellow: Fan speed alarm. The speed has exceeded the
threshold range significantly.
The supply voltage of the mainboard.
Meaning of numerical colors:

Green: The voltage is normal.

Yellow: Voltage alarm. The voltage has exceeded the threshold
range.

Red: Voltage alarm. The voltage has exceeded the threshold
range significantly.
The temperature inside the chassis
Meaning of numerical colors:

Green: The temperature is normal.

Yellow: Temperature alarm. The temperature has exceeded the
threshold range.

Red: Temperature alarm. The temperature has exceeded the
threshold range significantly.
The sync signal currently used.
The number of screens with load.
56