Table of Contents
Advertisement
4.7.3 Set Color Curves
Adjust the color curves.
Select the controller from the device list and then select Processing.
Set the Curves switch to
Figure 4-36 Curves
Select the white, red, green or blue channel.
Drag the slider at the bottom of the curve diagram to set the curve adjustment range.
Click anywhere on the curve to add an adjustment point and drag the point to adjust the curve.
Input and Output indicate the absolute coordinates of the adjustment point in the curve diagram.
To delete the adjustment point, drag the point outside the curve diagram, or select the point and press Delete.
Click the
icon at the right of Channel to reset the curve of the current channel. Click the
Curves to reset all the curves.
4.7.4 Enable 3D LUT
A set of mapping relationships are defined in the 3D LUT file (.cube) to adjust the colors of the video source.
Prerequisites
A 17×17×17 3D LUT file must be prepared in advance.
Operating Procedure
Select the controller from the device list and then select Processing.
Click anywhere in the Load 3DLUT File area, select a file and open it.
Figure 4-37 Loading 3D LUT file
Set the 3D LUT to
www.novastar.tech
.
and drag the slider to adjust the strength of the 3D LUT.
MX6000 LED Display Controller User Manual
icon next to
30
Advertisement
Table of Contents
