NovaStar MX6000 Pro User Manual page 27

Figure 4-21 Color adjustment
Table 4-1
Descriptions of color adjustment parameters
Parameter
Black Level
Contrast
Saturation
Hue
Red Shadow/Green
Shadow/Blue Shadow
Red Highlight/Green
Highlight/Blue Highlight
Set HDR Parameters
Note
To set HDR parameters, the hardware must support HDR and the HDR10 or HLG sources must be prepared.
Select an HDR format from the drop-down list of Format and set related parameters. Select Auto and the software
will read the attribute value that comes with the input source.
www.novastar.tech
Description
It is used to adjust the brightness of the dark areas of the image. The smaller the value,
the darker the dark part of the screen.
It is used to adjust the brightness of the highlight areas of the image. The greater the
value, the brighter the highlight part of the screen.
Contrast and black level together affect the overall contrast of the image.
It is used to adjust the color purity of the image. The greater the value, the more vivid the
color.
It is used to adjust the color effect of the displayed image color. Generally, it is divided
into warm, cool and intermediate tones.
It is used to adjust the brightness of the dark areas of the image. The principle is the same
as that of black level, but only the RGB components are adjusted.
It is used to adjust the brightness of the highlight areas of the image. The principle is the
same as that of contrast, but only the RGB components are adjusted.
MX6000 LED Display Controller User Manual
23