Table of Contents
Advertisement
Figure 4-7 Layout
Click New Screen.
Enter a screen name on the pop-up window.
Figure 4-8 New Screen
Select a Working Mode. When operating as a Send-Only Controller, please configure the layer layout as well.
All-In-One Controller supports free layer layout; Send-Only Controller is subject to fixed layer layout.
Set low latency.
When low latency is set to
Click OK once you are done.
Related Operations:
Edit screen: Click Edit in the Screen section of the properties area.
Delete screen: click
Select multiple screens: Hold Ctrl and click on the screen names.
4.4.2 Configure Screen Topology
Select the controller from the device list and then select Layout.
www.novastar.tech
, the latency at the data-sending end is reduced by 1 frame.
on the right side of the screen tab or
MX6000 LED Display Controller User Manual
in the top right corner of the topology area.
14
Advertisement
Table of Contents
