Set Internal Sources - NovaStar MX6000 Pro User Manual

Figure 4-22 HDR
HDR10 parameters:

PQ Mode: The mapping method of video source brightness.
−
ST2084 (PQ): This mode 1:1 maps the brightness of the video source. The part that exceeds the maximum
screen brightness will still be displayed as the maximum screen brightness.
−
ST2086 (Linear mapping): This mode linearly maps the brightness of the video source. It globally adjust the
video source brightness according to the maximum screen brightness to ensure that the ratio of the
brightness of the entire source content remains unchanged.

MaxCLL: The override value of the maximum video source brightness. MaxCLL takes effect when Override is
selected.

4.5.3 Set Internal Sources

The internal sources can be used for screen testing and troubleshooting. Select the controller from the device list and
then select Source. Select an internal source from the source list and do the following as required.
Set the Image
Select an image and set the Grayscale, Gradient Stretch, Speed, and Space. The adjustable parameters for each
image may vary based on the interface.

Static images

Dynamic images
www.novastar.tech
MX6000 LED Display Controller User Manual
24