Table of Contents
Advertisement
: Disabled.
5.3 Input
5.3.1 Set Internal Source
Select Input from the main menu to access the input source list.
Select Internal source to open the parameter settings.
Figure 5-6 Input source
Select Internal Source, navigate to the sub-interface, and then select an image.
Press BACK to return to the parameter settings.
Set the Grayscale, Gradient Stretch, Speed, and Space. The adjustable parameters for each image may vary
based on the interface.
Select Resolution, Frame Rate, and Bit Depth in sequence and set a value for each in the pop-up dialog box.
After the settings are done, click Apply.
5.3.2 Check Input Source Information
Select Input from the main menu to access the input source list.
Select an input source to access the Information tab.
www.novastar.tech
MX6000 LED Display Controller User Manual
59
Advertisement
Table of Contents
